|
|
| Injection
Pumps
|
|
|
 |
At the heart of every Agri-Inject
chemigation system is a diaphragm metering pump. We made the
decision to utilize only diaphragm pumps, rather than piston type pumps,
many years ago. And the reasons remain as valid today as they were
then. They involve accuracy, reliability, ease of operation, and
safety. The primary difference between the diaphragm pump and the
piston pump is simple. In the diaphragm pump, there are very few
moving parts and only a limited portion of the internal area is exposed to
the chemical being injected. |
| A TeflonŽ diaphragm acts as a barrier
between the piston and the process fluid - the liquid fertilizer or
chemical being moved. The piston's pumping motion is applied to a
hydraulic fluid, causing the diaphragm to flex and move the process fluid.
The diaphragm style pump is leak-proof, making it safe for handling all
types of chemicals. All moving parts are submerged in oil, giving it
a longer life with a minimum of maintenance. On our mRoy diaphragm
pumps, the injection rate can be adjusted while the unit is running.
Accurate calibration of the pump to minute increments is as simple as
turning a dial. Choose from FIG Pumps, maxRoy
Pumps, Series A/P, B Pumps or Series
G Pumps.
|
|
|
|
FIG
Pumps
|
 |
The FIG pump is
fully adjustable from 1.9 Gallons per Hour to .04 Gallons per Hour,
Teflon diaphragm separates internal workings from corrosive materials
and flexes gently to move concentrated chemicals with pinpoint accuracy,
the head and check valves are made of polypropylene and the check balls
are ceramic. The pump comes standard as a 110 volt, single phase pump
but can be special ordered as 12 volt DC or 3 phase. Call for more
information regarding pump conversion. Choose from the following
models: |
|
|
|
|
FIG
PUMP - 1.9 GPH Low Volume Pump
Code: 506-01-000019-0
Your Cost: Contact
a Dealer |
|
|
|
maxRoy
Pumps
|
 |
MaxRoy is a
rugged, industrial grade high capacity metering pump for use in systems
that operate at pressures less than 150 PSIG. The MaxRoy is
hydraulically actuated PTFE/elastomer bonded diaphragm acts as
separating membrane between hydraulic and process fluids-diaphragm is
subjected to uniform, gentle stresses for maximum life. The MaxRoy pump
comes in three sizes 130 Gallons Per Hour, 190 Gallons Per Hour, and 227
Gallons Per Hour the pump can be adjusted with a 10:1 turn down ratio
with a 1% Steady State Accuracy. The pump can be ordered 12 volt DC,
Single phase, and 3 phase. Choose from the following models: |
|
|
|
|
MAXROY
SIMPLEX PUMP - 190B SS 3 PHASE
Code: 501-51-001900-3
Your Cost: Contact
a Dealer |
|
|
|
|
MAXROY
SIMPLEX PUMP - 227B SS 3 PH
Code: 501-51-002270-3
Your Cost: Contact
a Dealer |
|
|
|
Series
A/P, B Pumps
|
|
Milton Roy
diaphragm metering pumps deliver the accuracy that makes chemigation so
effective. The mRoy series A/P, B hydraulic diaphragm pumps are
the most reliable metering pumps that Agri-Inject has to offer.
It's not unusual to find mRoy pumps still operating after 20 years. The
A/P, B series offers hydraulically actuated Teflon disc diaphragm,
steady state accuracy + or - 1.0% over 1:10 turndown while running or
stopped, simplex or duplex pumping heads, five year warranty, features a
56 C face motor and choose from single phase, 12 volt DC or three phase.
Agri-Inject is a world-wide distributor and authorized service center
for Milton Roy agricultural pumps. Choose from the following
pumps: |
|
|
|
|
MROY
SIMPLEX PUMP - 0.7P 3PH SS
Code: 501-51-000007-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 1.6P 3PH SS
Code: 501-51-000016-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 2.5P 3PH SS
Code: 501-51-000025-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 5.6P 3PH SS
Code: 501-51-000056-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 11.1P 3PH SS
Code: 501-51-000111-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 18P 3PH SS
Code: 501-51-000180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 30A 3PH SS
Code: 501-51-000300-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 57B 3PH SS
Code: 501-51-000570-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 85B 3PH LOW FLANGE SS
Code: 501-51-000850-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 1.6/11.1P 3PH SS
Code: 501-51-016111-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 2.5/5.6P 3PH SS
Code: 501-51-025056-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 2.5/18P 3PH SS
Code: 501-51-025180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 4/30A 3PH SS
Code: 501-51-040300-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 5.6/18P 3PH SS
Code: 501-51-056180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 9.8/30P 3PH SS
Code: 501-51-098300-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 18/18P 3PH SS
Code: 501-51-180180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 30/30A 3PH SS
Code: 501-51-300300-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 85/85B 3PH SS
Code: 501-51-850850-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 1.6P 3PH ALLOY 20
Code: 501-52-000016-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 2.5P 3PH ALLOY 20
Code: 501-52-000025-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 5.6P 3PH ALLOY 20
Code: 501-52-000056-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 11.1P 3PH ALLOY20
Code: 501-52-000111-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 18P 3PH ALLOY20
Code: 501-52-000180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 30A 3PH ALLOY20
Code: 501-52-000300-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 57B 3PH ALLOY20
Code: 501-52-000570-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
SIMPLEX PUMP - 85B 3PH ALLOY20
Code: 501-52-000850-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 2.5/18P 3PH ALLOY 20
Code: 501-52-025180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 5.6/5.6P 3PH ALLOY 20
Code: 501-52-056056-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 18/18P 3PH ALLOY 20
Code: 501-52-180180-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 30/30A 3PH ALLOY 20
Code: 501-52-300300-3
Your Cost: Contact
a Dealer |
|
|
|
|
MROY
DUPLEX PUMP - 85/85B 3PH ALLOY 20
Code: 501-52-850850-3
Your Cost: Contact
a Dealer |
|
|
|
Series
G Pumps
|
 |
The new line of
Series G pumps give you a wide choice of pumping options. With few
moving parts, all pumps are designed for reliable operation with a
minimum of maintenance. All pumps are easy to adjust, even when
the system is operating, with the easy-to-read micrometer dial, assuring
accurate calibration. Agri-Inject is a world-wide distributor and
authorized service center for Milton Roy agricultural pumps. Click
Here to view our Series G Pump Selection Guide. Choose from
the following pumps: |
|
|
|
|
SERIES
G PUMP - 28 GPH
Code: 500-19-458541-P
Your Cost: Contact
a Dealer |
|
|
|
|
SERIES
G PUMP - 55 GPH
Code: 500-19-468541-P
Your Cost: Contact
a Dealer |
|
|
|
|
SERIES
G PUMP - 110 GPH
Code: 500-19-478541-P
Your Cost: Contact
a Dealer |
|
|
|
|
SERIES
G PUMP - 150 GPH
Code: 500-19-488541-P
Your Cost: Contact
a Dealer |
|
|
|
|
SERIES
G PUMP - 310 GPH
Code: 500-19-498541-P
Your Cost: Contact
a Dealer |
|
|
| Series
G Metering Pumps Brochure
|
|
|
